FDREPORT FIELD NAMES for FDR System Data

The following tables list the field names that can be used to report on FDR system data in REPORT, SORT, and SUMMARY statements as well as PUNCH masks and TITLE statements. The field name tables are listed by DATATYPE showing the fields available for the specified DATATYPE.

The following FDREPORT data sources are also available

The tables shown the following information for each field, full descriptions can be found on the FDREPORT fields page:

DATATYPE ARCHIVE FIELD NAME TABLE

This is the operand list for all data sets (both VSAM and non-VSAM). ARCHIVE extracts data set information from the FDRABR Archive Control File (ACF). Backup information, if requested, is gathered from the catalog using the LOCATE SVC.

Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
DATATYPE=ARCHIVE Field Name Table
Field Name XSEL REP SORT SUMM PUN Len Attr Description
%FREE A Y Y V Y 3 NUM Tracks not in use within a data set as a percentage
%USED A Y Y V Y 3 NUM Tracks in use within a data set as a percentage
ACTTTR A Y Y V Y 6 HEX Actual TTR of archive record
ADATE A Y Y V Y D DATE Archive date
ADAYS A Y Y V Y 5 NUM Days since archived
ARCDSN A Y N V Y 44 CHAR Archive Control File (ACF) name
ARCFLAG1 E Y Y V Y 5 CHAR Archive Flags (byte 1):

CLSERROR (X) - Component marked for delete because there is no corresponding cluster
DELCOMP (Z) - Component marked for delete because cluster is to be deleted
EXTRESTR (E) - External restore from archive
FIVEVOLS (F) - Archive backup spans more than five volumes
INTRESTR (I) - Internal restore from archive
MULTIVOL (M) - Portion of multi-volume data set archived from one volume
RESTORED (R) - Entry restored from archive or restore from archive was attempted
SULABEL (S) - Data set is restored with an SUL
ARCFLAG2 E Y Y V Y 5 CHAR Archive Flags (byte 2):

ABRTAPE (T) - Backup is an ABR tape, not archive tape
CLUSTER (C) - Cluster entry
DELETE (D) - External delete from archive
DISKBKUP (B) - Backup data set created on DASD device
NOTCAT (N) - Backup data set not cataloged
RECALL (A) - Data set archived with auto-recall
ARCTTR A Y Y V Y 6 HEX Archive record auto-recall TTR
ATIME A Y Y V Y 8 TIME Archive time - hh.mm.ss (APPL backup only)
BKDATE A Y Y V Y D DATE Backup date
BKDAYS A Y Y V Y 5 NUM Days since backup
BKDEVCLS E Y Y V Y 4 CHAR Backup tape device class:
DISK
TAPE
BKDEVTYP E Y Y V Y 7 CHAR Backup tape device type
BKDSNS A Y Y V Y 3 NUM Number of active backup data sets
BKEXDATE A Y V Y Y D DATE Backup expiration date
BKEXDAYS A Y V Y Y 5 NUM Days until backup expiration
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
BKFILENO A Y V Y Y 4 NUM Backup tape file number
BKSUFFIX E Y V Y Y 8 CHAR Backup tape data set name suffix
Note: This field supports selection via a mask.
BKTAPCNT A Y N Y Y 2 NUM Backup tape volume count
BKVOL E Y Y V Y 34 CHAR Backup tape volumes required to restore
Note: This field supports selection via a mask.
BLKSIZE A Y Y S Y 5 NUM Block size
BLKSTRK A Y Y V Y 4 NUM Blocks per track
BYTES A Y Y S Y B BYTE Allocated space (bytes / kB / MB)
BYTESFRE A Y Y S Y B BYTE Unused space (bytes / KB / MB)
BYTESTRK A Y Y V Y 5 NUM Bytes per track (calculated)
BYTESUSE A Y Y S Y B BYTE Used space (bytes / KB / MB)
CATALOG E Y Y V Y 3 CHAR Catalog status:

CAN - Cataloged to candidate volume
DRF - DASD read failure
ERR - Cataloged to another volume
NO - Not cataloged
ONL - Only cataloged
UNK - Cataloged, but unable to process with LOCATE
YES - Cataloged to this volume
Note: This can be expensive to collect if a large number of data sets are to be reported
CLUSTER A Y Y V Y 44 CHAR Cluster name (ICF VSAM)
COMPTYPE E Y Y N N 5 CHAR Component type (ICF VSAM):
AIXDA - AIX data component AIXIN - AIX index component DATA - Base cluster data component INDEX - Base cluster index component
CRDATE A Y Y V Y D DATE Creation date
CRDAYS A Y Y V Y 5 NUM Days since created
DAYSEXP A Y Y V Y 5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
DEVCLASS E Y N V Y 4 CHAR Device class
DEVTYPE E Y Y V Y 7 CHAR Device type
DSGROUP A Y 44 CHAR Data set group name
DSIND E Y Y V N 2 HEX Data set indicators (printed in hex):

LASTV (x'80') - Last volume
MULT8 (x'20') - Block size multiple of 8
PASSA (x'10') - Read / write password
PASSW (x'14') - Write password
RACF (x'40'’) - Discrete profile
UPDAT (x'02') - Data set updates
DSNAME A Y Y C Y 44 CHAR Data set name / VSAM component name
DSORG E Y Y V Y 3 CHAR Data set organization

AM - All VSAM
DA - Direct access
EF - ICF VSAM
HFS - Hierarchical File System
IAM - Innovation Access Method
IS - ISAM
PO - Partitioned (PDS)
POE - Partitioned Data Set Extended (PDSE)
PS - Physical Sequential
PSE - PS Extended format (large sequential)
U - Unmovable (may be appended to other forms)
UM - Unmovable (alternate format)
UN - Undefined
EXPDATE A Y Y V Y D DATE Expiration date
EXPDAYS A Y Y V Y 5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
INDEX E Y Y V Y 8 CHAR Index volume from data set name
LRDATE A Y Y Y Y D DATE Last reference date
LRDAYS A Y Y Y Y 5 NUM Days since last referenced
LRECL A Y Y V Y 5 NUM Data set logical reference length
LSTAR A Y Y N Y 6 HEX Data set last block pointer; specify as LSTAR=X'tttttrrr'
NOEPV A Y Y S Y 3 NUM Number of extents for data set on this volume
OLDBKUP Y Y V N 2 NUM ABR old backup # of ABR backup
OPTCD E Y Y V Y 2 HEX Option code byte:

A - (DAM) Actual addressing
BC - ICF VSAM catalog
C - (SAM) Chained scheduling using PCI
DB - (DAM) Dynamic buffering
E - (DAM) Extended search
F - (DAM) Feedback
I - (IS) Independent overflow area
IC - ICF VSAM data set
L - (IS) Delete
M - (IS) Master index
R - (IS) Reorganization criteria
RB - (DAM) Relative block addressing
RE - (DAM) Read exclusive
TO - (DAM) Track overflow
UF - (IS) Full track index write
W - (All) Write validity check
Y - (IS) Cylinder overflow area
RANK A Y Y N N 6 NUM Rank within sorted data (assigned)
RECFM E Y Y V Y 5 CHAR Record format:

A - ASA control character
B - Blocked
F - Fixed
M - Machine control character
S - Standard/spanned
T - Track overflow
U - Undefined
V - Variable
* - None of the above
RECTYPE Y Y V N 3 NUM FDREPORT data record type:

1 - Volume record
2 - Data set / component record
4 - Volume summary record
8 - Prior compressed data record
9 - Prior active fields record
64 - Compressed data record
128 - Active fields record
RECVER N Y Y V Y 4 CHAR FDREPORT product version record format
RUNDATE A Y Y Y Y D DATE Run date
RUNTIME A Y Y Y Y 8 TIME Run time - hh.mm.ss
SCLUSTER Y N N N 20 CHAR Short cluster name (first 20 bytes only)
SDSN Y N N N 20 CHAR Short data set name (first 20 bytes only)
SECAFLAG E Y Y V Y 5 CHAR Secondary allocation flags:

BLK - Allocated in blocks
CON - Contiguous (CONTIG)
CYL - Allocated in cylinders
FIV - Five largest extents (ALX)
MAX - Largest extent (MXIG)
RND - Rounded to cylinders (ROUND)
TRK - Allocated in tracks
SIZE A Y Y S Y 5* NUM Allocated tracks
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEFREE A Y Y S Y 5* NUM Tracks not in use within data set extents
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEUSED A Y Y S Y 5* NUM Tracks in use within data set extents
SNAME Y N N N 20 CHAR Short data set name or VSAM cluster name (first 20 bytes only)
SOURCE E Y Y N N 7 CHAR Source of the data record:

ARCHIVE - Archive control file
BCDS - HSM backup control data set
CATALOG - System catalog
CATARCH - Auto-recall records from catalog appended with Archive Control File (ACF) data
CATVTOC - Catalog records appended with VTOC and VVR data of selected volume(s)
MCDS - DFSMShsm migration control data set
TVTOC - FDR, FDRABR, or FDRDSF backup file(s)
VTOC - VTOC of volume
VTOCVVR - VTOC of volume appended with VVDS data
SPLCLS Y N N N 27 CHAR Split ICF cluster name on two lines
SPLDSN Y N N N 27 CHAR Split data set name on two lines
SPLNAME Y N N N 27 CHAR Split data set name or ICF cluster name on two lines
SYSID A Y Y Y Y 4 CHAR System identification from SMF
TRACKCAP Y Y V Y 5 NUM Maximum track capacity of device in bytes
TRKCYL Y Y V N 3 NUM Number of tracks per cylinder
TRKSVOL Y Y S Y 6 NUM Number of tracks on this volume
UCBID A Y N V Y 8 HEX UCB 4-byte device type (hex)
VOLGROUP A Y CHAR Volume group
Note: This field supports selection via a mask.
VOLSQ A Y Y V Y 3 NUM Data set volume sequence number
VOLUME A Y Y Y Y 6 CHAR Volume serial number
Note: This field supports selection via a mask.
XDSNAME E Y CHAR Extended data set name (selection only)

back to top


DATATYPE SCRATCH FIELD NAME TABLE

This is complete list of all operands that are available for use with DATATYPE=SCRATCH. They provide the ability to select data set information, both VSAM and non-VSAM, from the FDRABR scratch catalog and backup data from the FDRABR catalog.

DATATYPE=SCRATCH Field Name Table
Field NameXSELREPSORTSUMMPUN LenAttrDescription
ABRCYCLEAYYYY3 NUM ABR current cycle number
ABRGEN AYYYY4 NUM ABR current generation number
BKCYCLE AYYYY3 NUM ABR cycle number of backup tape
BKDATE AYYVYD DATEBackup date
BKDAYS AYYVY5 NUM Days since backup
BKDEVCLSEYYVY4 CHARBackup tape device class
BKDEVTYPEYYVY7 CHARBackup tape device type
BKDSNS AYYVY3 NUM Number of active backup data sets
BKEXDATEAYVYYD DATEBackup expiration date
BKEXDAYSAYVYY5 NUM Days until backup expiration
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
BKFILENOAYVYY4 NUM Backup tape file number
BKGEN AYYYY4 NUM ABR generation number of backup tape
BKSUFFIXEYVYY8 CHARBackup tape dsname suffix
Note: This field supports selection via a mask.
BKTAPCNTAYNYY2 NUM Backup tape volume count
BKTIME AYYYY8 TIMEBackup time - hhmmss (APPL backup / ABREXIT)
BKVOL EYYVY34CHARBackup tape volumes required to restore
Note: This field supports selection via a mask.
CATALOG EYYVY3 CHARCatalog status:

CAN - Cataloged to candidate volume
DRF - DASD read failure
ERR - Cataloged to another volume
NO - Not cataloged
ONL - Only cataloged
UNK - Cataloged, but unable to process with LOCATE
YES - Cataloged to this volume
Note: This can be expensive to collect if a large number of data sets are to be reported
CATNAME AYYVY44CHARName of the catalog
CATTTR AYYXY6 HEX DSCBTTR from catalog
CATVOL EYYXY6 CHARVolume where the data set is cataloged
Note: This field supports selection via a mask.
CATVOLCTAYYVY3 NUM Number of unique non-candidate volumes where the data set is cataloged
CATVOLTLAYYVY3 NUM Total number of unique volumes where the data set is cataloged
CLUSATTREYYNN24CHARCluster attributes (ICF VSAM):

ATL - Tape volume catalog
ATTREXT - Extended attribute (EA)
EXTEND - Extended format (EF)
FORMAT - Formatted pagespace
PAGESPACE - Pagespace
SWAPSPACE - Swapspace
TIMESSTAMP - Timestamps exist
VERIFYREQ - Verify is required (catalog only)
CLUSTER AYYVY44CHARCluster name (ICF VSAM)
CLUSTGROUPA 44CHARCluster group name (ICF VSAM)
COMPTYPEEYYNN5 CHARComponent type (ICF VSAM):

AIXDA - AIX data component
AIXIN - AIX index component
DATA - Base cluster data component
INDEX - Base cluster index component
CRDATE AYYYYD DATECreation date
CRDAYS AYYVY5 NUM Days since created
DATACLASEYYVY8 CHARSMS data class
Note: This field supports selection via a mask.
DAYSEXP AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
DEVCLASSEYNVY4 CHARDevice class
DEVTYPE EYYVY7 CHARDevice type
DSGROUP AY 44CHARData set group name
DSNAME AYYCY44CHARData set name / VSAM component name
DSORG EYYVY3 CHARData set organization

AM - All VSAM
DA - Direct access
EF - ICF VSAM
HFS - Hierarchical File System
IAM - Innovation Access Method
IS - ISAM
PO - Partitioned (PDS)
POE - Partitioned Data Set Extended (PDSE)
PS - Physical Sequential
PSE - PS Extended format (large sequential)
U - Unmovable (may be appended to other forms)
UM - Unmovable (alternate format)
UN - Undefined
EXPDATE AYYVYD DATEExpiration date
EXPDAYS AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
GDGENTRYAYYYY3 NUM Generation Data Group active entry count
GDGFLAGSEYYYY9 CHARGeneration Data Group flag byte
GDGGENERAYYYY4 NUM Generation Data Group generation number
GDGLIMITAYYYY3 NUM Generation Data Group active entry limit
GDGRELGNAYYYY3 NUM Generation Data Group relative generation
GDGVERSNAYYYY2 NUM Generation Data Group version number
INDEX YYVY8 CHARIndex volume from data set name
INDEXNUM YYVY3 NUM # of index level in the data set or cluster name that is extracted into field INDEX
LRTIME YYNN8 TIMELast reference time - hh.mm.ss (IAM / ICF VSAM)
MGMTCLASEYYVY8 CHARSMS management class
Note: This field supports selection via a mask.
NAME YYNY44CHARData set name
NVSAMATREYYYN6 CHARSMS-managed non-VSAM attributes (in NVR)
OLDBKUP YYVN2 NUM ABR old backup # of ABR backup
OPTCD EYYVY2 CHAROption code byte:

A - (DAM) Actual addressing
BC - ICF VSAM catalog
C - (SAM) Chained scheduling using PCI
DB - (DAM) Dynamic buffering
E - (DAM) Extended search
F - (DAM) Feedback
I - (IS) Independent overflow area
IC - ICF VSAM data set
L - (IS) Delete
M - (IS) Master index
R - (IS) Reorganization criteria
RB - (DAM) Relative block addressing
RE - (DAM) Read exclusive
TO - (DAM) Track overflow
UF - (IS) Full track index write
W - (All) Write validity check
Y - (IS) Cylinder overflow area
OWNER AYYYY8 CHAROwner ID
RANK AYYNN6 NUM Rank within sorted data (assigned)
RECTYPE YYVN3 NUM FDREPORT data record type:

1 - Volume record
2 - Data set / component record
4 - Volume summary record
8 - Prior compressed data record
9 - Prior active fields record
64 - Compressed data record
128 - Active fields record
RECVER YYVY4 CHARFDREPORT product version record format
RUNDATE AYYYYD DATERun date
RUNTIME AYYYY8 TIMERun time - hh.mm.ss
SDSN YNNN20CHARShort data set name (first 20 bytes only)
SMSFLAGSEYYVN4 CHARSMS-managed data set flag byte in DSCB:

MANAGED (S) - SMS-managed
NOBCS (N) - Not cataloged
REBLOCK (R) - Reblockable
DADSMCRT (D) - DADSM assigned blksize
PDSE (I) - Partitioned data set extended
PDSEX (X) - Hierarchical File System (HFS)
ATTREXTN (E) - Extended Attribute (EA)
STRIPE (Z) - Extended Format (EF)
SNAME YNNN20CHARShort data set name or VSAM cluster name (first 20 bytes only)
SOURCE EYYNN7 CHARSource of the data record:

ARCHIVE - Archive control file
BCDS - HSM backup control data set
CATALOG - System catalog
CATARCH - Auto-recall records from catalog appended with Archive Control File (ACF) data
CATVTOC - Catalog records appended with VTOC and VVR data of selected volume(s)
MCDS - DFSMShsm migration control data set
TVTOC - FDR, FDRABR, or FDRDSF backup file(s)
VTOC - VTOC of volume
VTOCVVR - VTOC of volume appended with VVDS data
SPLDSN YNNN27CHARSplit data set name on two lines
SPLNAME YNNN27CHARSplit data set name or ICF cluster name on two lines
STORCLASEYYVY8 CHARSMS storage class
Note: This field supports selection via a mask.
STORGRP EYYYY8 CHARSMS storage group name
Note: This field supports selection via a mask.
SYSID AYYYY4 CHARSystem identification from SMF
UCBID EYNVY8 HEX UCB 4-byte device type (hex)
VOLGROUPAY CHARVolume group
Note: This field supports selection via a mask.
VOLSQ AYYVY3 NUM Data set volume sequence number
VOLUME AYYYY6 CHARVolume serial number
Note: This field supports selection via a mask.
XDSNAME EY CHARExtended data set name (selection only).

back to top


DATATYPE TVTOC FIELD NAME TABLE

This is complete list of all operands that are available for use with DATATYPE=TVTOC. This data type extracts data set information from backup files produced by the INNOVATION DATA PROCESSING backup and recovery products FDR, FDRABR, and FDRDSF.

DATATYPE=TVTOC Field Name Table
Field NameXSELREPSORTSUMMPUN LenAttrDescription
%CA AYYYY3 NUM Free percentage in Control Area (CA)
%CAPUSEDAYYYY3 NUM Used percentage of allocation capacity
%CI AYYYY3 NUM Free percentage in Control Interval (CI)
%DIRFREEAYYYY3 NUM Free percentage of PDS directory blocks
%DIRUSEDAYYYY3 NUM Used percentage of PDS directory blocks
%FREE AYYVY3 NUM Tracks not in use within a data set as a percentage
%OVER AYYYY3 NUM Overflow records used as a percentage (IAM)
%USED AYYVY3 NUM Tracks in use within a data set as a percentage
ABRCYCLEAYYYY3 NUM ABR current cycle number
ABRGEN AYYYY4 NUM ABR current generation number
ABRHITRSAYYYY3 NUM ABR high volume threshold
ABRIND EYYYN5 CHARABR indicators:

A - Always backup / Never archive
B - Current ABR backup exists
N - Normal backup / Never archive
R - Archive requested
X - Exclude from ABR processing
For reports only, not for selection:
C - No current ABR backup exists
I - Instant backup is pending - SNAP, SPLIT, PSPLIT, or FCOPY has been done, but the point-in-time image has not yet been copied to a backup file
M - Multi-volume data set
T - Old backup recording is enabled
U - Updated since last ABR backup
ABRLOTRSAYYYY3 NUM ABR low volume threshold
ABRVPOPT YYYN7 CHARABR volume processing options:

C - Cycle table is active
I - Instant backup attempted
N - Never archive from this volume
S - Scratch is permitted
T - ABR thresholds are enabled
X - COPY1 expiration date active
Y - COPY2 expiration date active
0 (zero) - None of the above
AIXATTR EYYYN7 CHARAlternate index attributes (IAM / ICF VSAM only):

AIX - This is an AIX
UPGRADE - AIX with upgrade
AMDATTR EYYNN24CHARAMDATTR attributes (IAM / ICF VSAM only):

ESDS (ES) - Entry sequenced cluster
IMBED (IM) - Sequence set placed with data component
KEYRANGE (KE) - Key range defined
KSDS (KS) - Key sequenced cluster
ORDERED (OR) - Volumes to be used in the order they are specified in the VOLUMES parameter
REPLICATE (RE) - Each index record to be written on a track as many times as it fits
RRDS (RR) - Relative record data set
SPANNED (SP) - Data record can cross control interval boundary
WRITECHECK (WR) - Perform write check during WRITE processing
AMDATTR3EYYNN24CHARAMDATTR3 attributes (ICF VSAM / Enhanced IAM):

BIND (BI) - Cluster / component allocated to MSS device is stated at open and retained on device until closed
CYLFAULT (CY) - Cluster / component allocated to MSS device is not staged at open, but data is to be staged as needed
LINEAR (LI) - Linear cluster
LOADED (LO) - Data set is loaded
NONUNIQUE (NO) - Data set has non-unique keys
SHRBCS (SH) - Shared basic catalog
VARIABLE (VR) - Variable RRDS
WAITON (WA) - Destaging is to complete before control returned to programs that closes data set
ATTR2 EYYNN24CHARAttribute byte two (ICF VSAM only):

CATALOGBUSY - Catalog busy
CATALOGLOCK - Catalog is locked
COMPNOTUSE - Component is not usable
INTERNALDSN - Internal system data set
REGSHROPT1 - Share options 1
REGSHROPT2 - Share options 2
REGSHROPT3 - Share options 3
REGSHROPT4 - Share options 4
SYSSHROPT3 - Cross system share option 3
SYSSHROPT4 - Cross system share option 4
AXRKP AYYYY4 Alternate key RKP (ICF VSAM only)
BKCYCLE AYYYY3 NUM ABR cycle number of backup tape
BKDATE AYYVYD DATEBackup date
BKDAYS AYYVY5 NUM Days since backup
BKDEVCLSEYYVY4 CHARBackup tape device class
BKDEVTYPEYYVY7 CHARBackup tape device type
BKDSNS AYYVY3 NUM Number of active backup data sets
BKEXDATEAYVYYD DATEBackup expiration date
BKEXDAYSAYVYY5 NUM Days until backup expiration
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
BKFILENOAYVYY4 NUM Backup tape file number
BKGEN AYYYY4 NUM ABR generation number of backup tape
BKSUFFIXEYVYY8 CHARBackup tape dsname suffix
Note: This field supports selection via a mask.
BKTAPCNTAYNYY2 NUM Backup tape volume count
BKVOL EYYVY34CHARBackup tape volumes required to restore
Note: This field supports selection via a mask.
BLKSIZE AYYVY5 NUM Data set block size
BLKSTRK AYYVY4 NUM Number of blocks per track
BPTR YYNN10HEX Format 1 DSCB pointer to Format 2 / 3 DSCB
BYTES AYYSYB BYTEAllocated space (bytes / kB / MB)
BYTESFREAYYSYB BYTEUnused space (bytes / KB / MB)
BYTESTRKAYYVY5 NUM Bytes per track (calculated)
BYTESUSEAYYSYB BYTEUsed space (bytes / KB / MB)
CAPBYTESAYYYYB BYTEAlloc capacity (Bytes / kB / MB)
CASPLIT AYYYY8 NUM Control area splits (ICF VSAM only)
CASPLITRAYYYY6 NUM Control area split ratio (ICF VSAM only)
CATVRBA YYVY8 HEX Relative byte address of VVR from catalog
CICA AYYYY3 NUM Number of control intervals
CISIZE AYYYY5 NUM Control interval (CI) size (ICF VSAM)
CISPLIT AYYYY8 NUM Number of CI splits (ICF VSAM)
CISPLITRAYYYY6 NUM Control interval split ratio (ICF VSAM)
CLUSATTREYYNN24CHARCluster attributes (ICF VSAM):

ATL - Tape volume catalog
ATTREXT - Extended attribute (EA)
EXTEND - Extended format (EF)
FORMAT - Formatted pagespace
PAGESPACE - Pagespace
SWAPSPACE - Swapspace
TIMESSTAMP - Timestamps exist
VERIFYREQ - Verify is required (catalog only)
CLUSTER AYYVY44CHARCluster name (ICF VSAM)
CLUSTGROUPA 44CHARCluster group name (ICF VSAM)
COMPATTR YNNY24CHARComponent attributes (ICF VSAM):

ERAS - Erase
IMBD - Imbedded
IXD - Indexed
KRNG - Keyrange
NIXD - Non-indexed
NUMD - Relative
ORD - Ordered
RCVY - Recovery
REPL - Replicate
RUS - Reusable
SPED - Speed
SPND - Spanned
WCK - Write check
COMPTYPEEYYNN5 CHARComponent type (ICF VSAM):

AIXDA - AIX data component
AIXIN - AIX index component
DATA - Base cluster data component
INDEX - Base cluster index component
CRDATE AYYYYD DATECreation date
CRDAYS AYYVY5 NUM Days since created
CRJOBNAMEYYYY8 CHARCreating job name from Format9 DSCB
Note: This field supports selection via a mask.
CRSTEPNMEYYYY8 CHARCreating job step name from Format9 DSCB
Note: This field supports selection via a mask.
CRTIME AYYNN8 TIMECreation time - hh.mm.ss
CTFLD AYYNY10HEX Count field of data set DSCB - ccccchhhhrr
CTLMODEL YYYY3 CHARController model
DATACLASEYYVY8 CHARSMS data class
Note: This field supports selection via a mask.
DAYSEXP AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
DELETES AYYYY10NUM Number of records deleted (IAM / ICF VSAM)
DEVCLASSEYNVY4 CHARDevice class
DEVTYPE EYYVY7 CHARDevice type
DIRBFREEAYYYY5 NUM Number of unused PDS directory blocks
DIRBLOCKAYYYY5 NUM Number of PDS directory blocks
DIRBUSEDAYYYY5 NUM Number of used PDF directory blocks
DSGROUP AY 44CHARData set group name
DSIND EYYVN2 HEX Data set indicators (printed in hex):

LASTV (x'80') - Last volume
MULT8 (x'20') - Block size multiple of 8
PASSA (x'10') - Read / write password
PASSW (x'14') - Write password
RACF (x'40') - Discrete profile
UPDAT (x'02') - Data set updates
DSNAME AYYCY44CHARData set name / VSAM component name
DSORG EYYVY3 CHARData set organization

AM - All VSAM
DA - Direct access
EF - ICF VSAM
HFS - Hierarchical File System
IAM - Innovation Access Method
IS - ISAM
PO - Partitioned (PDS)
POE - Partitioned Data Set Extended (PDSE)
PS - Physical Sequential
PSE - PS Extended format (large sequential)
U - Unmovable (may be appended to other forms)
UM - Unmovable (alternate format)
UN - Undefined
DSSN EYYYY6 CHARVolume serial number field in DSCB
Note: This field supports selection via a mask.
EXCPS AYYYY10NUM Number of EXCP's (ICF VSAM)
EXPDATE AYYVYD DATEExpiration date
EXPDAYS AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
EXCPEXITEYNYN8 CHARException exit name (ICF VSAM)
Note: This field supports selection via a mask.
EXTENTS AYNNN15 Data set extent descriptors; each extent is stacked, up to 123 extents may be printed - ccccchhhh
Note: The length of this field is two (2) bytes larger if the FATDISK option is enabled.
EXTYPE ENNNN CHARExtent type

CYLBN - Extent on cylinder boundary
INDEX - Index extent
PRIME - Prime extent
OFLOW - Overflow extent
SUL - Standard user label extent
FLAG1 EYYYN7 CHARData set flag byte (extended format)

CHKPTDSN (CHK) - Check-pointed data set
COMPRESS (COM) - Data set is compressible
EATTR (ENO & EOP) - Extended attribute setting
EATTRNO (ENO) - EATTR=NO
EATTROPT (EOP) - EATTR=OPT
LARGE (LRG) - Data set may exceed 65,535 tracks
RECALL (RCL) - Data set has been recalled (by DFSMShsm)
FREEEXT AYYYY4 NUM # of free extents this volume
GDGBASE YYNY44CHARGeneration Data Group base name
HIALOBLKAYYYY10NUM High allocated block (IAM)
HIALORBAAYYNY10NUM High allocated RBA (ICF VSAM / Enhanced IAM)
HIKEYRBAAYYNY10NUM High key RBA (ICF VSAM)
HIUSEBLKAYYYY10NUM High used block (IAM)
HIUSERBAAYYNY10NUM High used RBA (ICF VSAM / Enhanced IAM)
IAMINDICEYYYN5 CHARIAM data set indicators:

ALTINDEX - Alternate index
DATACOMPRESS - Data compression threshold
ENHANCED - Enhanced file structure
EXTENDED - Extended format
HARDWARECOMP - Hardware compression
KEYCOMPRESS - Compressed index
PATH - Path
SPANNED - Spanned records
INDEX YYVY8 CHARIndex volume from data set name
INDEXLEV YYYY5 NUM Number of index levels (ICF VSAM only)
INDEXNUM YYVY3 NUM # of index level in the data set or cluster name that is extracted into field INDEX
INSERTS AYYYY10NUM Number of records inserted (IAM / ICF VSAM)
KEYLEN AYYVY3 NUM Data set key length
LRDATE AYYYYD DATELast reference date
LRDAYS AYYYY5 NUM Days since last referenced
LRECL AYYVY5 NUM Data set logical reference length
LRTIME YYNN8 TIMELast reference time - hh.mm.ss (IAM / ICF VSAM)
LSTAR AYYNY6 HEX Data set last block pointer; specify as LSTAR=X'tttttrrr'
MAXLRECLAYYYY6 NUM Maximum record length (IAM / ICF VSAM)
MAXSIZE AYYYY5 NUM Maximum allocated tracks
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
MEMBERS AYYYY6 NUM Number of PDS members
MGMTCLASEYYVY8 CHARSMS management class
Note: This field supports selection via a mask.
NAME YYNY44CHARData set name
NOBDB AYYNY3 NUM Number of bytes used in last directory block
NOEPV AYYSY3 NUM Number of extents for data set on this volume
NOEXTENTAYYYY3 NUM Number of extents on this volume (total)
NVSAMATREYYYN6 CHARSMS-managed non-VSAM attributes (in NVR)
NVSAMFLGEYYYN7 CHARSMS-managed non-VSAM flags in NVR:

ATTREXT - Extended attribute (EA)
EXTEND - Extended Format (EF)
OLDBKUP YYVN2 NUM ABR old backup # of ABR backup
OPTCD EYYVY2 CHAROption code byte:

A - (DAM) Actual addressing
BC - ICF VSAM catalog
C - (SAM) Chained scheduling using PCI
DB - (DAM) Dynamic buffering
E - (DAM) Extended search
F - (DAM) Feedback
I - (IS) Independent overflow area
IC - ICF VSAM data set
L - (IS) Delete
M - (IS) Master index
R - (IS) Reorganization criteria
RB - (DAM) Relative block addressing
RE - (DAM) Read exclusive
TO - (DAM) Track overflow
UF - (IS) Full track index write
W - (All) Write validity check
Y - (IS) Cylinder overflow area
OVERFBLKAYYYY10NUM Number of overflow blocks (IAM)
OVERFLOWAYYYY10NUM Number of overflow records available (IAM)
OVERFPERAYYYY3 NUM Overflow percent of used blocks (IAM)
OVERUSEDAYYYY10NUM Number of overflow records used (IAM)
OWNER AYYYY8 CHAROwner ID
PRIALLOCAYYYY8 NUM Primary allocation quantity (ICF VSAM / Enhanced IAM)
PRIBYTESAYYYYB BYTEPrimary allocation in bytes (ICF VSAM / Enhanced IAM)
PRIMEUSE YYYY8 NUM Number of used prime extension blocks (IAM)
PRIMEXTN YYYY8 NUM Number of prime extension blocks (IAM)
PROTECT YNYN4 CHARProtection indicators:

PASR - Password required for read and write
PASW - Password required for write
RACF - Protected by IBM RACF or equivalent product
NONE - No security indicated in Format1 DSCB
RANK AYYNN6 NUM Rank within sorted data (assigned)
RECFM EYYVY5 CHARRecord format:

A - ASA control character
B - Blocked
F - Fixed
M - Machine control character
S - Standard/spanned
T - Track overflow
U - Undefined
V - Variable
* - None of the above
RECORDS AYYYY10NUM Number of records (IAM / ICF VSAM)
RECOVDTAEYYYN8 SMS recovery data in VVR
RECTYPE YYVN3 NUM FDREPORT data record type:

1 - Volume record
2 - Data set / component record
4 - Volume summary record
8 - Prior compressed data record
9 - Prior active fields record
64 - Compressed data record
128 - Active fields record
RECVER YYVY4 CHARFDREPORT product version record format
RESOROWNEYYYN16CHARSMS resource ownership in VVR
RETRIEVEAYYYY10NUM Number of records retrieved (IAM / ICF VSAM)
RKP AYYYY4 NUM Data set relative key position
RSVD1 YYYY2 Reserved field (offset 61 / x'3D')
RSVD2 YYYY8 Reserved field (offset 78 / x'4E')
RUNDATE AYYYYD DATERun date
RUNTIME AYYYY8 TIMERun time - hh.mm.ss
SCLUSTER YNNN20CHARShort cluster name (first 20 bytes only)
SECAFLAGEYYVY5 CHARSecondary allocation flags:

BLK - Allocated in blocks
CON - Contiguous (CONTIG)
CYL - Allocated in cylinders
FIV - Five largest extents (ALX)
MAX - Largest extent (MXIG)
RND - Rounded to cylinders (ROUND)
TRK - Allocated in tracks
SECALLOCAYYYY8 NUM Secondary allocation quantity
SECBYTESAYYYY BYTESecondary allocation (Bytes, kBytes, MBytes)
SECVERMOEYNYN8 CHARSecurity verification module (ICF VSAM)
Note: This field supports selection via a mask.
SDSN YNNN20CHARShort data set name (first 20 bytes only)
SECURFLG YYYN4 CHARSecurity Flags:

RACF - Discrete IBM RACF profile
OWNC - Ownership cluster
SECXFLAG YYYN3 CHARSecondary allocation extension flag:

ABL - Average block length
BYT - Bytes
KBY - Kilobytes
MBY - Megabytes
SELALIAS YYYY35CHARSelecting alias
SGDGBASE YNNN20CHARShort GDG base name (first 20-bytes)
SHROPT YNYY3 CHARShare options (ICF VSAM / IAM)
SIZE AYYSY5*NUM Allocated tracks
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEFREEAYYSY5*NUM Tracks not in use within data set extents
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEUSEDAYYSY5*NUM Tracks in use within data set extents
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SMSFLAGSEYYVN4 CHARSMS-managed data set flag byte in DSCB:

MANAGED (S) - SMS-managed
NOBCS (N) - Not cataloged
REBLOCK (R) - Reblockable
DADSMCRT (D) - DADSM assigned blksize
PDSE (I) - Partitioned data set extended
PDSEX (X) - Hierarchical File System (HFS)
ATTREXTN (E) - Extended Attribute (EA)
STRIPE (Z) - Extended Format (EF)
SNAME YNNN20CHARShort data set name or VSAM cluster name (first 20 bytes only)
SOURCE EYYNN7 CHARSource of the data record:

ARCHIVE - Archive control file
BCDS - HSM backup control data set
CATALOG - System catalog
CATARCH - Auto-recall records from catalog appended with Archive Control File (ACF) data
CATVTOC - Catalog records appended with VTOC and VVR data of selected volume(s)
MCDS - DFSMShsm migration control data set
TVTOC - FDR, FDRABR, or FDRDSF backup file(s)
VTOC - VTOC of volume
VTOCVVR - VTOC of volume appended with VVDS data
SPACEFLGEYYYY3 CHARSpace allocation flags (ICF VSAM)

CYLINDERS - Allocated in cylinders
KILOBYTES - Allocated in kilobytes
MEGABYTES - Allocated in megabytes
RECORDS - Allocated in records
TRACKS - Allocated in tracks
SPLCLS YNNN27CHARSplit ICF cluster name on two lines
SPLDSN YNNN27CHARSplit data set name on two lines
SPLGDGB YNNN27CHARSplit GDG base name
SPLNAME YNNN27CHARSplit data set name or ICF cluster name on two lines
STORCLASEYYVY8 CHARSMS storage class
Note: This field supports selection via a mask.
STORGRP EYYYY8 CHARSMS storage group name
Note: This field supports selection via a mask.
STRIPECTAYYYN3 NUM Extended format stripe count
SUBCFLAGEYYYN17CHARSMS sub-cell flag byte in VVR

FUZZYBK1 - Data set eligible for backup while open for update
FUZZYBK2 - Data set backup while open for update is blocked
LOGRECVR - Data set was restored with a backup copy taken when the data set was open for update
SUBCVERSAYYYN3 NUM SMS sub-cell version number in VVR
SYSCODE EYYYN13HEX System code field in DSCB
Note: This field supports selection via a mask.
SYSID AYYYY4 CHARSystem identification from SMF
TIMESTMP YYNN16CHARTime stamp (IAM / ICF VSAM)
TRACKCAP YYVY5 NUM Maximum track capacity of device in bytes
TRKBAL YYNY5 NUM Data set track balance; number of free bytes on last active track
TRKCYL YYVN3 NUM Number of tracks per cylinder
TRKSCA YYYY3 NUM Number of tracks per Control Area (CA) (ICF VSAM)
TRKSVOL YYSY6 NUM Number of tracks on this volume
TVTOCDSNAYYVY44CHARInput backup data set name
UCBID EYNVY8 HEX UCB 4-byte device type (hex)
UPDATES AYYYY10NUM Number of records updated (IAM / ICF VSAM)
USEDEXT AYYYY4 NUM Number of used extents this volume
USERDATAAYYYY10CHARUser data size - extended
VOLGROUPAY CHARVolume group
Note: This field supports selection via a mask.
VOLID EYYYY4 CHARDASD volume identification
Note: This field supports selection via a mask.
VOLSQ AYYVY3 NUM Data set volume sequence number
VOLUME AYYYY6 CHARVolume serial number
Note: This field supports selection via a mask.
VSFREBYTAYYYN10NUM Bytes of free space (ICF VSAM)
VVRSTATSEYYYN9 CHARIndicates VVDS errors for this data set (up to 2 may be displayed):

DPLR - Multiple identical VVR / NVR records
EXTM - Extent mismatch between VVR and DSCB
MLTQ - Multiple VVR 'Q' records
MLTR - Multiple non-identical VVR / NVR records
NONE - No errors
NVVR - No VVR / NVR record (or all matching records have errors)
XDSNAME EY CHARExtended data set name (selection only)
XLSTAR AYYNY8 HEX Extended last block pointer - ttttttttrrr or X'xxxxxxxx'

back to top


DATATYPE ENCRYPT FIELD NAME TABLE

This is complete list of all operands that are available for use with DATATYPE=ENCRYPT representing the data sets residing in the FDRCRYPT “keyfile”. The name of the “keyfile” is usually stored in the FDR Global Options Table. Complete access to the “keyfile” requires the completion of a successful RACROUTE command using: REQUEST=AUTH ENTITY=”keyfile” ATTR=ALTER VOLSER=volser
Only with successful completion of the RACROUTE request is permission given to fully display the encryption key.

DATATYPE=ENCRYPT Field Name Table
Field NameXSELREPSORTSUMMPUN LenAttrDescription
ENCRBDAYAYYYY5 NUM Number of days since encrypted
ENCRGDSNEYYYY44CHAROriginal backup data set name
ENCRBVOLEYYYY6 CHAROriginal first backup volume
Note: This field supports selection via a mask.
ENCRDATEAYYYYD DATEBackup date
ENCRFLGSEYYYN5< /td>CHAREncryption flag byte

DELETE - Record marked for deletion
FDRCAMS - File was encrypted by FDRCAMS
GENERATEDKEY - Key was generated by FDRCRYPT
MASTERKEYAPPLIED - A master key was used during the encryption
PUBLICKEYAPPLIED - A public key was used during the encryption
TAPEFILE - The backup file resides on a tape device
UPSTREAM - The backup file was created by FDR/UPSTREAM
ENCRGLSQAYYNY5 NUM Original backup file sequence number
ENCRKEY EYNNN32HEX Encryption key
ENCRTIMEAYYNN8 TIMEBackup time - hh.mm.ss
ENCRTYPEEYYYN6 CHAREncryption type

AES128 - Advanced Encryption Standard (AES) with a 128 bit (16 byte) key
AES192 - Advanced Encryption Standard (AES) with a 192 bit (24 byte) key
AES256 - Advanced Encryption Standard (AES) with a 256 bit (32 byte) key
AESFAST - Advanced Encryption Standard (AES) with a 128 bit (16 byte) key
CIPHER - Transformation consisting of character substitution plus transpositionvbased on a randomly generated 4096 bit (512 byte) key
SUBSTITUTE - Character substitution transformation of the data based on a randomly generated 2048 bit (256 byte) key
ENCRVOL EYYYY6 CHAROriginal serial number encrypted
Note: This field supports selection via a mask.
SPLEBDSN Y 20CHAROriginal backup data set name - ABR split format

back to top


DATATYPE ARCHIVE FIELD NAME TABLE

DATA EXTRACT FDREPORT can write the selected data to an extract file (in a unique FDREPORT format). The extract file can be used as input for further reports. This allows you to gather the data once and then report on it in various formats or using varying selection criteria. It is possible to use this extract file as input to other data analysis programs, such as SAS, if they can read the extract file format. FDREPORT can also “print” data in a simple tabular format (no headings or page breaks) for input into other programs.
There is only one specific operand that applies to DATATYPE=EXTRACT. As EXTRACT reads data files created by FDREPORT from all other data sources, this means all operands that are used for other data sources can be used, based on the original data type or source. Refer to the original DATATYPE for a complete list of the accepted operands.

DATATYPE=EXTRACT Field Name Table
Field NameXSELREPSORTSUMMPUN LenAttrDescription
ARCDSNAYYYY44CHARArchive Control File name


Published with permission of Innovation Data Processing

back to top


  FDRABR pages

Lascon latest major updates

Welcome to Lascon Storage. This site provides hints and tips on how to manage your data, strategic advice and news items.