FDREPORT FIELD NAMES for Datasets and Volumes

The following tables list the field names that can be used to report on Volume, Catalog and Dataset data in REPORT, SORT, and SUMMARY statements as well as PUNCH masks and TITLE statements. The field name tables are listed by DATATYPE showing the fields available for the specified DATATYPE.

The following FDREPORT data sources are also available

The tables shown the following information for each field, full descriptions can be found on the FDREPORT fields page:

DATATYPE CATALOG FIELD NAME TABLE

This is the operand list for all data sets (both VSAM and non-VSAM). CATALOG extracts data set information from the Catalog.

DATATYPE=CATALOG Field Name Table
Field NameXSELREPSORTSUMMPUNLenAttrDescription
ACTIVE EYNCN3CHARENQUEUE status:

NO
YES
AIXNAMEEY 44CHARAlternate index cluster name (ICF VSAM only)
ALILEVEL YNCY2NUM Alias level
ALISTATS YNCN3CHARAlias stats:

NO - alias is not currently active
YES - alias is currently active
ATTR1 EYYNN24CHARAttribute byte one (ICF VSAM only):

ERASE - Erase when deleted
INHIBIT - Access for read only
RECOVERY - Control areas preformatted
REUSEABLE - Can be reopened as NEW
SPEED - Control areas not preformatted
TEMPEXPORT - Portable copy has been made
TRACKOVER - Track overflow
UNIQUE
CANDVOLCAYYVY3NUM Number of unique candidate volumes where the data set is cataloged
CATALOG EYYVY3CHARCatalog status:

CAN - Cataloged to candidate volume
DRF - DASD read failure
ERR - Cataloged to another volume
NO - Not cataloged
ONL - Only cataloged
UNK - Cataloged but unable to process with LOCATE
YES - Cataloged to this volume
Note: This can be expensive to collect if a large number of data sets are to be reported
CATNAMEAYYVY44CHARName of the catalog
CATTTR AYYXY6 HEX DSCBTTR from catalog
CATVOL EYYXY6 CHARVolume where the data set is cataloged
Note: This field supports selection via a mask.
CATVOLCTAYYVY3 NUM Number of unique non-candidate volumes where the data set is cataloged
CATVOLTLAYYVY3 NUM Total number of unique volumes where the data set is cataloged
CATVRBA YYVY8 HEX Relative byte address of VVR from catalog
CLUSATTREYYNN24CHARCluster attributes (ICF VSAM):

ATL - Tape volume catalog
ATTREXT - Extended attribute (EA)
EXTEND - Extended format (EF)
FORMAT - Formatted pagespace
PAGESPACE - Pagespace
SWAPSPACE - Swapspace
TIMESSTAMP - Timestamps exist
VERIFYREQ - Verify is required (catalog only)
CLUSTER AYYVY44CHARCluster name (ICF VSAM)
CMPCANDVAYYVY3 NUM Number of candidate volumes cataloged to component
CMPVOLCTAYYVY3 NUM Number of volumes cataloged to this component
CMPVOLTLAYYVY3 NUM Total volumes cataloged to this component
COMPTYPEEYYNN5 CHARComponent type (ICF VSAM):

AIXDA - AIX data component
AIXIN - AIX index component
DATA - Base cluster data component
INDEX - Base cluster index component
CRDATE AYYVYD DATECreation date
CRDAYS AYYVY5 NUM Days since created
CTLMODEL Y
CTLSERNOEYYYY5 CHARController serial number
Note: This field supports selection via a mask.
DATACLA EYYVY8 CHARSMS data class
Note: This field supports selection via a mask.
DAYSEXP AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above this is set to 65535.
DEVCLASSEYNVY4 CHARDevice class
DEVTYPE EYYVY7 CHARDevice type
DSGROUP AY 44CHARData set group name
DSNALCNTAYYYY5 NUM Number of associated aliases
DSNALIASAYYYY44CHARData set name alias
DSNAME AYYCY44CHARData set name / VSAM component name
DSORG EYYVY3 CHARData set organization

AM - All VSAM
DA - Direct access
EF - ICF VSAM
HFS - Hierarchical File System
IAM - Innovation Access Method
IS - ISAM
PO - Partitioned (PDS)
POE - Partitioned Data Set Extended (PDSE)
PS - Physical Sequential
PSE - PS Extended format (large sequential)
U - Unmovable (may be appended to other forms)
UM - Unmovable (alternate format)
UN - Undefined
EXPDATE AYYVYD DATEExpiration date
EXPDAYS AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above this is set to 65535.
FILESEQ AYYNY5 NUM File sequence number (from catalog)
GDGBASE YYNY44CHARGeneration Data Group base name
GDGENTRYAYYYY3 NUM Generation Data Group active entry count
GDGFLAGSEYYYY9 CHARGeneration Data Group flag byte
GDGGENERAYYYY4 NUM Generation Data Group generation number
GDGLADATAYYYYD DATEGeneration Data Group last altered date (GDGBASE only)
GDGLADAYAYYYY5 NUM Generation Data Group days since last altered (GDGBASE only)
GDGLIMITAYYYY3 NUM Generation Data Group active entry limit
GDGRELGNAYYYY3 NUM Generation Data Group relative generation
GDGVERSNAYYYY2 NUM Generation Data Group version number
INDEX EYYVY8 CHARIndex volume from data set name
INDEXNUM YYVY3 NUM # of index level in the data set or cluster name that is extracted into field INDEX
MFRCODE EYYYY3 CHARManufactures code
Note: This field supports selection via a mask.
MGMTCLASEYYVY8 CHARSMS management class
Note: This field supports selection via a mask.
NAME YYNY44CHARData set name or VSAM cluster name
NVSAMATREYYYN6 CHARSMS-managed non-VSAM attributes (in NVR)
OPTCD EYYVY2 HEX Option code byte:

A - (DAM) Actual addressing
BC - ICF VSAM catalog
C - (SAM) Chained scheduling using PCI
DB - (DAM) Dynamic buffering
E - (DAM) Extended search
F - (DAM) Feedback
I - (IS) Independent overflow area
IC - ICF VSAM data set
L - (IS) Delete
M - (IS) Master index
R - (IS) Reorganization criteria
RB - (DAM) Relative block addressing
RE - (DAM) Read exclusive
TO - (DAM) Track overflow
UF - (IS) Full track index write
W - (All) Write validity check
Y - (IS) Cylinder overflow area
OWNER AYYYY8 CHAROwner ID
PATHNAMEEYYYY44CHARPath name (ICF VSAM)
RANK AYYNN6 NUM Rank within sorted data (assigned)
RECTYPE YYVN3 NUM FDREPORT data record type:

1 - Volume record
2 - Data set / component record
4 - Volume summary record
8 - Prior compressed data record
9 - Prior active fields record
64 - Compressed data record
128 - Active fields record
RECVER YYVY4 CHARFDREPORT product version record format
RELALCNTAYYYY5 NUM Relative number of associated aliases
RUNDATE AYYYYD DATERun date
RUNTIME AYYYY8 TIMERun time - hh.mm.ss
SCLUSTER YNNN20CHARShort cluster name (first 20 bytes only)
SDSN YNNN20CHARShort data set name (first 20 bytes only)
SECURFLGYYYYN4 CHARSecurity Flags:

RACF - Discrete IBM RACF profile
OWNC - Ownership cluster
SECURITYEYNYN4 CHARResults of RACROUTE invocation

DSCB - Data set protected by a specific profile
NODS - No decision returned by SAF
NONE - No protection
PROFILE - Data set protected by a generic profile
SELALIAS YYYY35CHARSelecting alias
SGDGBASE YNNN20CHARShort GDG base name (first 20-bytes)
SMSFLAGSEYYVN4 CHARSMS-managed data set flag byte in DSCB:

MANAGED (S) - SMS-managed
NOBCS (N) - Not cataloged
REBLOCK (R) - Reblockable
DADSMCRT (D) - DADSM assigned blksize
PDSE (I) - Partitioned data set extended
PDSEX (X) - Hierarchical File System (HFS)
ATTREXTN (E) - Extended Attribute (EA)
STRIPE (Z) - Extended Format (EF)
SNAME YNNN20CHARShort data set name or VSAM cluster name (first 20 bytes only)
SPLCLS YNNN27CHARSplit ICF cluster name on two lines
SPLDSN YNNN27CHARSplit data set name on two lines
SPLGDGB YNNN27CHARSplit GDG base name
SPLNAME YNNN27CHARSplit data set name or ICF cluster name on two lines
SSID EYYYY4 CHARControl unit subsystem identifier
Note: This field supports selection via a mask.
STORCLASEYYVY8 CHARSMS storage class
Note: This field supports selection via a mask.
STORGRP EYYYY8 CHARSMS storage group name
Note: This field supports selection via a mask.
SYSID AYYYY4 CHARSystem identification from SMF
UCBID EYNVY8 HEX UCB 4-byte device type (hex)
UNIT YYYYY3 CHARUnit address of DASD volume
VOLCFLAGYYYYN8 CHARVolume cell flags (ICF VSAM):

CANDWSPACE (C) - Candidate with space
EXTENTSYNC (E) - Extents do not match VTOC
GUARSPACE (G) - SMS guaranteed space
OVERFLOWVOL (O) - Overflow volume
PRIMEVOLUME (P) - Prime volume
RELCIADDR (R) - Relative CI addressing
VOLGROUPAY CHARVolume group
Note: This field supports selection via a mask.
VOLSQ AYYVY3NUMData set volume sequence number
VOLUME AYYYY6CHARVolume serial number
Note: This field supports selection via a mask.
XDSNAME EY CHARExtended data set name (selection only)

back to top


DATATYPE CATARCH FIELD NAME TABLE

This is the operand list for all data sets (both VSAM and non-VSAM). CATARCH starts the search process at the catalog and using data derived from the catalog, extracts data set information from the FDRABR Archive Control File (ACF).

DATATYPE=CATARCH Field Name Table
Field Name XSEL REP SORT SUMM PUN Len Attr Description
%FREE A Y Y V Y 3 NUM Tracks not in use within a data set as a percentage
%USED A Y Y V Y 3 NUM Tracks in use within a data set as a percentage
ACTTTR A Y Y V Y 6 HEX Actual TTR of archive record
ADATE A Y Y V Y D DATE Archive date
ADAYS A Y Y V Y 5 NUM Days since archived
AIXNAME E Y 44 CHAR Alternate index cluster name (ICF VSAM only)
ARCFLAG1 E Y Y V Y 5 CHAR Archive Flags (byte 1):
CLSERROR (X) - Component marked for delete because there is no corresponding cluster
DELCOMP (Z) - Component marked for delete because cluster is to be deleted
EXTRESTR (E) - External restore from archive
FIVEVOLS (F) - Archive backup spans more than five volumes
INTRESTR (I) - Internal restore from archive
MULTIVOL (M) - Portion of multi-volume data set archived from one volume
RESTORED (R) - Entry restored from archive or restore from archive was attempted
SULABEL (S) - Data set is restored with an SUL
ARCFLAG2 E Y Y V Y 5 CHAR Archive Flags (byte 2):
ABRTAPE (T) - Backup is an ABR tape, not archive tape
CLUSTER (C) - Cluster entry
DELETE (D) - External delete from archive
DISKBKUP (B) - Backup data set created on DASD device
NOTCAT (N) - Backup data set not cataloged
RECALL (A) - Data set archived with auto-recall
ARCTTR A Y Y V Y 6 HEX Archive record auto-recall TTR
ATIME A Y Y V Y 8 TIME Archive time - hh.mm.ss (APPL backup only)
ATTR1 E Y Y N N 24 CHAR Attribute byte one (ICF VSAM only):
ERASE - Erase when deleted
INHIBIT - Access for read only
RECOVERY - Control areas preformatted
REUSEABLE - Can be reopened as NEW
SPEED - Control areas not preformatted
TEMPEXPORT - Portable copy has been made
TRACKOVER - Track overflow
UNIQUE
BKDATE A Y Y V Y D DATE Backup date
BKDAYS A Y Y V Y 5 NUM Days since backup
BKDEVCLS E Y Y V Y 4 CHAR Backup tape device class
BKDEVTYP E Y Y V Y 7 CHAR Backup tape device type
BKDSNS A Y Y V Y 3 NUM Number of active backup data sets
BKEXDATE A Y V Y Y D DATE Backup expiration date
BKEXDAYS A Y V Y Y 5 NUM Days until backup expiration
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
BKFILENO A Y V Y Y 4 NUM Backup tape file number
BKSUFFIX E Y V Y Y 8 CHAR Backup tape dsname suffix
Note: This field supports selection via a mask.
BKTAPCNT A Y N Y Y 2 NUM Backup tape volume count
BKVOL E Y Y V Y 34 CHAR Backup tape volumes required to restore
Note: This field supports selection via a mask.
BYTES A Y Y S Y B BYTE Allocated space (bytes / kB / MB)
BYTESFRE A Y Y S Y B BYTE Unused space (bytes / KB / MB)
BYTESTRK A Y Y V Y 5 NUM Bytes per track (calculated)
BYTESUSE A Y Y S Y B BYTE Used space (bytes / KB / MB)
BLKSIZE A Y Y V Y 5 NUM Data set block size
BLKSTRK A Y Y V Y 4 NUM Number of blocks per track
CANDVOLC A Y Y V Y 3 NUM Number of unique candidate volumes where the data set is cataloged
CATALOG E Y Y V Y 3 CHAR Catalog status:
CAN - Cataloged to candidate volume
DRF - DASD read failure
ERR - Cataloged to another volume
NO - Not cataloged
ONL - Only cataloged
UNK - Cataloged, but unable to process with LOCATE
YES - Cataloged to this volume
Note: This can be expensive to collect if a large number of data sets are to be reported
CATNAME A Y Y V Y 44 CHAR Name of the catalog
CATTTR A Y Y X Y 6 HEX DSCBTTR from catalog
CATVOL E Y Y X Y 6 CHAR Volume where the data set is cataloged
Note: This field supports selection via a mask.
CATVOLCT A Y Y V Y 3 NUM Number of unique non-candidate volumes where the data set is cataloged
CATVOLTL A Y Y V Y 3 NUM Total number of unique volumes where the data set is cataloged
CATVRBA Y Y V Y 8 HEX Relative byte address of VVR from catalog
CLUSATTR E Y Y N N 24 CHAR Cluster attributes (ICF VSAM):
ATL - Tape volume catalog
ATTREXT - Extended attribute (EA)
EXTEND - Extended format (EF)
FORMAT - Formatted pagespace
PAGESPACE - Pagespace
SWAPSPACE - Swapspace
TIMESSTAMP - Timestamps exist
VERIFYREQ - Verify is required (catalog only)
CLUSTER A Y Y V Y 44 CHAR Cluster name (ICF VSAM)
COMPTYPE E Y Y N N 5 CHAR Component type (ICF VSAM):
AIXDA - AIX data component
AIXIN - AIX index component
DATA - Base cluster data component
INDEX - Base cluster index component
CRDATE A Y Y Y Y D DATE Creation date
CRDAYS A Y Y V Y 5 NUM Days since created
CTLMODEL Y Y Y Y 3 CHAR Controller model
DATACLAS E Y Y V Y 8 CHAR SMS data class
Note: This field supports selection via a mask.
DAYSEXP A Y Y V Y 5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
DEVCLASS E Y N V Y 4 CHAR Device class
DEVTYPE E Y Y V Y 7 CHAR Device type
DSGROUP A Y 44 CHAR Data set group name
DSIND E Y Y V N 2 HEX Data set indicators (printed in hex):
LASTV (x'80') - Last volume
MULT8 (x'20') - Block size multiple of 8
PASSA (x'10') - Read / write password
PASSW (x'14') - Write password
RACF (x'40') - Discrete profile
UPDAT (x'02') - Data set updates
DSNALCNT A Y Y Y Y 5 NUM Number of associated aliases
DSNALIAS A Y Y Y Y 44 CHAR Data set name alias
DSNAME A Y Y C Y 44 CHAR Data set name / VSAM component name
DSORG E Y Y V Y 3 CHAR Data set organization
AM - All VSAM
DA - Direct access
EF - ICF VSAM
HFS - Hierarchical File System
IAM - Innovation Access Method
IS - ISAM
PO - Partitioned (PDS)
POE - Partitioned Data Set Extended (PDSE)
PS - Physical Sequential
PSE - PS Extended format (large sequential)
U - Unmovable (may be appended to other forms)
UM - Unmovable (alternate format)
UN - Undefined
EXPDATE A Y Y V Y D DATE Expiration date
EXPDAYS A Y Y V Y 5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
FILESEQ A Y Y N Y 5 NUM File sequence number (from catalog)
GDGBASE N Y Y N Y 44 CHAR Generation Data Group base name
GDGENTRY A Y Y Y Y 3 NUM Generation Data Group active entry count
GDGFLAGS E Y Y Y Y 9 CHAR Generation Data Group flag byte
GDGGENER A Y Y Y Y 4 NUM Generation Data Group generation number
GDGLIMIT A Y Y Y Y 3 NUM Generation Data Group active entry limit
GDGRELGN A Y Y Y Y 3 NUM Generation Data Group relative generation
GDGVERSN A Y Y Y Y 2 NUM Generation Data Group version number
INDEX E Y Y V Y 8 CHAR Index volume from data set name
INDEXNUM Y Y V Y 3 NUM # of index level in the data set or cluster name that is extracted into field INDEX
LRECL A Y Y V Y 5 NUM Data set logical reference length
LSTAR A Y Y N Y 6 HEX Data set last block pointer; specify as LSTAR=X'tttttrrr'
MGMTCLAS E Y Y V Y 8 CHAR SMS management class
Note: This field supports selection via a mask.
NAME Y Y N Y 44 CHAR Data set name or VSAM cluster name
NVSAMATR E Y Y Y N 6 CHAR SMS-managed non-VSAM attributes (in NVR)
OPTCD E Y Y V Y 2 HEX Option code byte:
A - (DAM) Actual addressing
BC - ICF VSAM catalog
C - (SAM) Chained scheduling using PCI
DB - (DAM) Dynamic buffering
E - (DAM) Extended search
F - (DAM) Feedback
I - (IS) Independent overflow area
IC - ICF VSAM data set
L - (IS) Delete
M - (IS) Master index
R - (IS) Reorganization criteria
RB - (DAM) Relative block addressing
RE - (DAM) Read exclusive
TO - (DAM) Track overflow
UF - (IS) Full track index write
W - (All) Write validity check
Y - (IS) Cylinder overflow area
OWNER A Y Y Y Y 8 CHAR Owner ID
NOEPV A Y Y S Y 3 NUM Number of extents for data set on this volume
RANK A Y Y N N 6 NUM Rank within sorted data (assigned)
RECFM E Y Y V Y 5 CHAR Record format:
A - ASA control character
B - Blocked
F - Fixed
M - Machine control character
S - Standard/spanned
T - Track overflow
U - Undefined
V - Variable
* - None of the above
RECTYPE Y Y V N 3 NUM FDREPORT data record type:
1 - Volume record
2 - Data set / component record
4 - Volume summary record
8 - Prior compressed data record
9 - Prior active fields record
64 - Compressed data record
128 - Active fields record
RECVER Y Y V Y 4 CHAR FDREPORT product version record format
RELALCNT A Y Y Y Y 5 NUM Relative number of associated aliases
RUNDATE A Y Y Y Y D DATE Run date
RUNTIME A Y Y Y Y 8 TIME Run time - hh.mm.ss
SCLUSTER Y N N N 20 CHAR Short cluster name (first 20 bytes only)
SDSN Y N N N 20 CHAR Short data set name (first 20 bytes only)
SECAFLAG E Y Y V Y 5 CHAR Secondary allocation flags:
BLK - Allocated in blocks
CON - Contiguous (CONTIG)
CYL - Allocated in cylinders
FIV - Five largest extents (ALX)
MAX - Largest extent (MXIG)
RND - Rounded to cylinders (ROUND)
TRK - Allocated in tracks
SECURFLG Y Y Y Y N 4 CHAR Security Flags:
RACF - Discrete IBM RACF profile
OWNC - Ownership cluster
SELALIAS Y Y Y Y 35 CHAR Selecting alias
SGDGBASE Y N N N 2 CHAR Short GDG base name (first 20-bytes)
SIZE A Y Y S Y 5* NUM Allocated tracks
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEFREE A Y Y S Y 5* NUM Tracks not in use within data set extents
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEUSED A Y Y S Y 5* NUM Tracks in use within data set extents
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SMSFLAGS E Y Y V N 4 CHAR SMS-managed data set flag byte in DSCB:
MANAGED (S) - SMS-managed
NOBCS (N) - Not cataloged
REBLOCK (R) - Reblockable
DADSMCRT (D) - DADSM assigned blksize
PDSE (I) - Partitioned data set extended
PDSEX (X) - Hierarchical File System (HFS)
ATTREXTN (E) - Extended Attribute (EA)
STRIPE (Z) - Extended Format (EF)
SNAME v Y N N N 20 CHAR Short data set name or VSAM cluster name (first 20 bytes only)
SOURCE E Y Y N N 7 CHAR Source of the data record:
ARCHIVE - Archive control file
BCDS - HSM backup control data set
CATALOG - System catalog
CATARCH - Auto-recall records from catalog appended with Archive Control File (ACF) data
CATVTOC - Catalog records appended with VTOC and VVR data of selected volume(s)
MCDS - DFSMShsm migration control data set
TVTOC - FDR, FDRABR, or FDRDSF backup file(s)
VTOC - VTOC of volume
VTOCVVR - VTOC of volume appended with VVDS data
SPACEFLG E Y Y Y Y 3 CHAR Space allocation flags (ICF VSAM)
CYLINDERS - Allocated in cylinders
KILOBYTES - Allocated in kilobytes
MEGABYTES - Allocated in megabytes
RECORDS - Allocated in records
TRACKS - Allocated in tracks
STORCLAS E Y Y V Y 8 CHAR SMS storage class
Note: This field supports selection via a mask.
STORGRP E Y Y Y Y 8 CHAR SMS storage group name
Note: This field supports selection via a mask.
SYSID A Y Y Y Y 4 CHAR System identification from SMF
TRACKCAP Y Y V Y 5 NUM Maximum track capacity of device in bytes
TRKCYL Y Y V N 3 NUM Number of tracks per cylinder
TRKVOL Y
UCBID E Y N V Y 8 HEX UCB 4-byte device type (hex)
VOLCFLAG Y Y Y Y N 8 CHAR Volume cell flags (ICF VSAM):
CANDWSPACE (C) - Candidate with space
EXTENTSYNC (E) - Extents do not match VTOC
GUARSPACE (G) - SMS guaranteed space
OVERFLOWVOL (O) - Overflow volume
PRIMEVOLUME (P) - Prime volume
RELCIADDR (R) - Relative CI addressing
VOLGROUP A Y CHAR Volume group
Note: This field supports selection via a mask.
VOLSQ A Y Y V Y 3 NUM Data set volume sequence number
VOLUME A Y Y Y Y 6 CHAR Volume serial number
Note: This field supports selection via a mask.
XDSNAME E Y CHAR Extended data set name (selection only)

back to top


DATATYPE CATVTOC FIELD NAME TABLE

This is complete list of all operands that are available for use with DATATYPE=CATVTOC. They provide the ability to select all data sets, both VSAM and non-VSAM, directory entries and members from any form of partitioned data set, generation data groups. The volumes and/or the data sets may be managed by ABR, SMS or not managed.

DATATYPE=CATVTOC Field Name Table
Field NameXSELREPSORTSUMMPUN LenAttrDescription
%CA AYYYY3 NUM Free percentage in Control Area (CA)
%CAPUSED AYYYY3 NUM Used percentage of allocation capacity
%CI AYYYY3 NUM Free percentage in Control Interval (CI)
%DIRFREE AYYYY3 NUM Free percentage of PDS directory blocks
%DIRUSED AYYYY3 NUM Used percentage of PDS directory blocks
%FREE AYYVY3 NUM Tracks not in use within a data set as a percentage
%OVER AYYYY3 NUM Overflow records used as a percentage (IAM)
%USED AYYVY3 NUM Tracks in use within a data set as a percentage
ABRCYCLE AYYYY3 NUM ABR current cycle number
ABRGEN AYYYY4 NUM ABR current generation number
ABRHITRS AYYYY3 NUM ABR high volume threshold
ABRIND EYYYN5 CHARABR indicators:

A - Always backup / Never archive
B - Current ABR backup exists
N - Normal backup / Never archive
R - Archive requested
X - Exclude from ABR processing
For reports only, not for selection:
C - No current ABR backup exists
I - Instant backup is pending - SNAP, SPLIT, PSPLIT, or FCOPY has been done, but the point-in-time image has not yet been copied to a backup file
M - Multi-volume data set
T - Old backup recording is enabled
U - Updated since last ABR backup
ABRLOTRS AYYYY3 NUM ABR low volume threshold
ABRVPOPT YYYN7 CHARABR volume processing options:

C - Cycle table is active
I - Instant backup attempted
N - Never archive from this volume
S - Scratch is permitted
T - ABR thresholds are enabled
X - COPY1 expiration date active
Y- COPY2 expiration date active
0 (zero) - None of the above
ACTIVE EYNCN3 CHARENQUEUE status:

NO
YES
AIXATTR EYYYN7 CHARAlternate index attributes (IAM / ICF VSAM only):

AIX - This is an AIX
UPGRADE - AIX with upgrade
AIXNAME EY 44 CHARAlternate index cluster name (ICF VSAM only)
AMDATTR EYYNN24 CHARAMDATTR attributes (IAM / ICF VSAM only):

ESDS (ES) - Entry sequenced cluster
IMBED (IM) - Sequence set placed with data component
KEYRANGE (KE) - Key range defined
KSDS (KS) - Key sequenced cluster
ORDERED (OR) - Volumes to be used in the order they are specified in the VOLUMES parameter
REPLICATE (RE) - Each index record to be written on a track as many times as it fits
RRDS (RR) - Relative record data set
SPANNED (SP) - Data record can cross control interval boundary
WRITECHECK (WR) - Perform write check during WRITE processing
AMDATTR3 EYYNN24CHARAMDATTR3 attributes (ICF VSAM / Enhanced IAM):

BIND (BI) - Cluster / component allocated to MSS device is stated at open and retained on device until closed
CYLFAULT (CY) - Cluster / component allocated to MSS device is not staged at open, but data is to be staged as needed
LINEAR (LI) - Linear cluster
LOADED (LO) - Data set is loaded
NONUNIQUE (NO) - Data set has non-unique keys
SHRBCS (SH) - Shared basic catalog
VARIABLE (VR) - Variable RRDS
WAITON (WA) - Destaging is to complete before control returned to programs that closes data set
ATTR1 EYYNN24CHARAttribute byte one (ICF VSAM only):

ERASE - Erase when deleted
INHIBIT - Access for read only
RECOVERY - Control areas preformatted
REUSEABLE - Can be reopened as NEW
SPEED - Control areas not preformatted
TEMPEXPORT - Portable copy has been made
TRACKOVER - Track overflow
UNIQUE
ATTR2 EYYNN24CHARAttribute byte two (ICF VSAM only):

CATALOGBUSY - Catalog busy
CATALOGLOCK - Catalog is locked
COMPNOTUSE - Component is not usable
INTERNALDSN - Internal system data set
REGSHROPT1 - Share options 1
REGSHROPT2 - Share options 2
REGSHROPT3 - Share options 3
REGSHROPT4 - Share options 4
SYSSHROPT3 - Cross system share option 3
SYSSHROPT4 - Cross system share option 4
AXRKP AYYYY4 Alternate key RKP (ICF VSAM only)
BKCYCLE AYYYY3 NUM ABR cycle number of backup tape
BKDATE AYYVYD DATEBackup date
BKDAYS AYYVY5 NUM Days since backup
BKDEVCLS EYYVY4 CHARBackup tape device class
BKDEVTYP EYYVY7 CHARBackup tape device type
BKDSNS AYYVY3 NUM Number of active backup data sets
BKEXDATE AYVYYD DATE Backup expiration date
BKEXDAYS AYVYY5 NUM Days until backup expiration
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
BKFILENO AYVYY4 NUM Backup tape file number
BKGEN AYYYY4 NUM ABR generation number of backup tape
BKSUFFIX EYVYY8 CHARBackup tape dsname suffix
Note: This field supports selection via a mask.
BKTAPCNT AYNYY2 NUM Backup tape volume count
BKTIME AYYYY8 TIMEBackup time - hhmmss (APPL backup / ABREXIT)
BKVOL EYYVY34CHARBackup tape volumes required to restore
Note: This field supports selection via a mask.
BLKSIZE AYYVY5 NUM Data set block size
BLKSTRK AYYVY4 NUM Number of blocks per track
BPTR YYNN10HEX Format 1 DSCB pointer to Format 2 / 3 DSCB
BUFSIZE AYYYY6 NUM Buffer size (ICF VSAM only)
BYTES AYYSYB BYTEAllocated space (bytes / kB / MB)
BYTESFREAYYSYB BYTEUnused space (bytes / KB / MB)
BYTESTRKAYYVY5 NUM Bytes per track (calculated)
BYTESUSEAYYSYB BYTEUsed space (bytes / KB / MB)
CANDVOLCAYYVY3 NUM Number of unique candidate volumes where the data set is cataloged
CAPBYTESAYYYYB BYTEAlloc capacity (Bytes / kB / MB)
CASPLIT AYYYY8 NUM Control area splits (ICF VSAM only)
CASPLITRAYYYY6 NUM Control area split ratio (ICF VSAM only)
CATALOG EYYVY3 CHARCatalog status:

CAN - Cataloged to candidate volume
DRF - DASD read failure
ERR - Cataloged to another volume
NO - Not cataloged
ONL - Only cataloged
UNK - Cataloged, but unable to process with LOCATE
YES - Cataloged to this volume
Note: This can be expensive to collect if a large number of data sets are to be reported
CATGROUP A 44CHARCatalog group name
CATNAME AYYVY44CHARName of the catalog
CATTTR AYYXY6 HEX DSCBTTR from catalog
CATVOL EYYXY6 CHARVolume where the data set is cataloged
Note: This field supports selection via a mask.
CATVOLCT AYYVY3 NUM Number of unique non-candidate volumes where the data set is cataloged
CATVOLTL AYYVY3 NUM Total number of unique volumes where the data set is cataloged
CATVRBA YYVY8 HEXRelative byte address of VVR from catalog
CCA AYYNY2 Channel connect address
CICA AYYYY3 NUM Number of control intervals
CISIZE AYYYY5 NUM Control interval (CI) size (ICF VSAM)
CISPLIT AYYYY8 NUM Number of CI splits (ICF VSAM)
CISPLITR AYYYY6 NUM Control interval split ratio (ICF VSAM)
CLUSATTR EYYNN24CHARCluster attributes (ICF VSAM):

ATL - Tape volume catalog
ATTREXT - Extended attribute (EA)
EXTEND - Extended format (EF)
FORMAT - Formatted pagespace
PAGESPACE - Pagespace
SWAPSPACE - Swapspace
TIMESSTAMP - Timestamps exist
VERIFYREQ - Verify is required (catalog only)
CLUSTER AYYVY44CHARCluster name (ICF VSAM)
CLUSTGROUPA 44CHARCluster group name (ICF VSAM)
CMPCANDV AYYVY3 NUM Number of candidate volumes cataloged to component
CMPVOLCT AYYVY3 NUM Number of volumes cataloged to this component
CMPVOLTL AYYVY3 NUM Total volumes cataloged to this component
COMPATTR YNNY24CHARComponent attributes (ICF VSAM):

ERAS - Erase
IMBD - Imbedded
IXD - Indexed
KRNG - Keyrange
NIXD - Non-indexed
NUM D - Relative
ORD - Ordered
RCVY - Recovery
REPL - Replicate
RUS - Reusable
SPED - Speed
SPND - Spanned
WCK - Write check
COMPTYPE EYYNN5 CHARComponent type (ICF VSAM):

AIXDA - AIX data component
AIXIN - AIX index component
DATA - Base cluster data component
INDEX - Base cluster index component
COMPUSER AYYYY10NUM Compressed user data size - extended
CRDATE AYYYYD DATECreation date
CRDAYS AYYVY5 NUM Days since created
CRJOBNAM EYYYY8 CHARCreating job name from Format9 DSCB
Note: This field supports selection via a mask.
CRSTEPNM EYYYY8 CHARCreating job step name from Format9 DSCB
Note: This field supports selection via a mask.
CRTIME AYYNN8 TIMECreation time - hh.mm.ss
CTFLD AYYNY10HEX Count field of data set DSCB - ccccchhhhrr
CTLMODEL YYYY3 CHARController model
CTLSERNO EYYYY5 CHARController serial number
Note: This field supports selection via a mask.
CTLTYPE YYYY6 CHARController type
DATACLAS EYYVY8 CHARSMS data class
Note: This field supports selection via a mask.
DAYSEXP AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
DELETES AYYYY10NUM Number of records deleted (IAM / ICF VSAM)
DEVCLASS EYNVY4 CHARDevice class
DEVTYPE EYYVY7 CHARDevice type
DIRBFREE AYYYY5 NUM Number of unused PDS directory blocks
DIRBLOCK AYYYY5 NUM Number of PDS directory blocks
DIRBUSED AYYYY5 NUM Number of used PDF directory blocks
DSGROUP AY 44CHARData set group name
DSIND EYYVN2 HEX Data set indicators (printed in hex):

LASTV (x'80') - Last volume
MULT8 (x'20') - Block size multiple of 8
PASSA (x'10') - Read / write password
PASSW (x'14') - Write password
RACF (x'40') - Discrete profile
UPDAT (x'02') - Data set updates
DSNALCNT AYYYY5 NUM Number of associated aliases
DSNALIAS AYYYY44CHARData set name alias
DSNAME AYYCY44CHARData set name / VSAM component name
DSNEIFLG EYYYN2 CHARData set info flags (ICF VSAM):

GIGABYTE (G) - Extended addressability (>4gb)
RELCI (R) - Relative CI addressing
ZFS (Z) - Contains zSeries File System (zFS)
DSNFLAGS EYNYN4 CHARAssorted data set flags
RLS - Record level sharing
DSORG EYYVY3 CHARData set organization:

AM - All VSAM
DA - Direct access
EF - ICF VSAM
HFS - Hierarchical File System
IAM - Innovation Access Method
IS - ISAM
PO - Partitioned (PDS)
POE - Partitioned Data Set Extended (PDSE)
PS - Physical Sequential
PSE - PS Extended format (large sequential)
U - Unmovable (may be appended to other forms)
UM - Unmovable (alternate format)
UN - Undefined
DSSN EYYYY6 CHARVolume serial number field in DSCB
Note: This field supports selection via a mask.
EXCPEXIT EYNYN8 CHARException exit name (ICF VSAM)
Note: This field supports selection via a mask.
EXCPS AYYYY10NUM Number of EXCP's (ICF VSAM)
EXPDATE AYYVYD DATEExpiration date
EXPDAYS AYYVY5 NUM Days until expire
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
EXTENTS AYNNN15 Data set extent descriptors; each extent is stacked, up to 123 extents may be printed - ccccchhhh
Note: The length of this field is two (2) bytes larger if the FATDISK option is enabled.
EXTYPE ENNNN CHARExtent type

CYLBN - Extent on cylinder boundary
INDEX - Index extent
PRIME - Prime extent
OFLOW - Overflow extent
SUL - Standard user label extent
FILESEQ AYYNY5 NUM File sequence number (from catalog)
FLAG1 EYYYN7 CHARData set flag byte (extended format)

CHKPTDSN (CHK) - Check-pointed data set
COMPRESS (COM) - Data set is compressible
EATTR (ENO & EOP) - Extended attribute setting
EATTRNO (ENO) - EATTR=NO
EATTROPT (EOP) - EATTR=OPT
LARGE (LRG) - Data set may exceed 65,535 tracks
RECALL (RCL) - Data set has been recalled (by DFSMShsm)
FREEEXT AYYYY4 NUM # of free extents this volume
GDGBASE YYNY44CHARGeneration Data Group base name
GDGENTRY AYYYY3 NUM Generation Data Group active entry count
GDGFLAGS EYYYY9 CHARGeneration Data Group flag byte
GDGGENER AYYYY4 NUM Generation Data Group generation number
GDGLIMIT AYYYY3 NUM Generation Data Group active entry limit
GDGRELGN AYYYY3 NUM Generation Data Group relative generation
GDGVERSN AYYYY2 NUM Generation Data Group version number
HIALOBLK AYYYY10NUM High allocated block (IAM)
HIALORBA AYYNY10NUM High allocated RBA (ICF VSAM / Enhanced IAM)
HIKEYRBA AYYNY10NUM High key RBA (ICF VSAM)
HIUSEBLK AYYYY10NUM High used block (IAM)
HIUSERBA AYYNY10NUM High used RBA (ICF VSAM / Enhanced IAM)
IAMINDIC EYYYN5 CHARIAM data set indicators:

ALTINDEX - Alternate index
DATACOMPRESS - Data compression threshold
ENHANCED - Enhanced file structure
EXTENDED - Extended format
HARDWARECOMP - Hardware compression
KEYCOMPRESS - Compressed index
PATH - Path
SPANNED - Spanned records
INDEX EYYVY8 CHARIndex volume from data set name
INDEXNUM YYVY3 NUM # of index level in the data set or cluster name that is extracted into field INDEX
INSERTS AYYYY10NUM Number of records inserted (IAM / ICF VSAM)
KEYLEN AYYVY3 NUM Data set key length
LASTBKUPEYYNN13CHARSMS last backup date/time from VVR - yyyyddd/hhmm
LINKLIST*NNNNn/an/aRetrieve data set list from LINKLIST (selection only)
LMJOB EYYYY8 CHARLast modifying job name (ASM2 users only)
Note: This field supports selection via a mask.
LRDATE AYYYYDDATE Last reference date
LRDAYS AYYYY5 NUM Days since last referenced
LRECL AYYVY5 NUM Data set logical reference length
LRTIME YYNN8 TIMELast reference time - hh.mm.ss (IAM / ICF VSAM)
LSTAR AYYNY6 HEX Data set last block pointer; specify as LSTAR=X'tttttrrr'
MAXLRECLAYYYY6 NUM Maximum record length (IAM / ICF VSAM)
MAXSIZE AYYYY5 NUM Maximum allocated tracks
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
MEMBABASEYYYY8 CHARPDS / PDSE member name alias base
Note: This field supports selection via a mask.
MEMBAMODEYYYN3 PDS / PDSE member load module AMODE
MEMBATTREYYYN19CHARPDS / PDSE member load module attributes

AC1 - Authorization code 1
NOEX - Not executable
OL - Only loadable
REFR - Refreshable
RENT - Reentrant
REUS - Serially reusable
MEMBCRDTEYYYYDDATE PDS / PDSE member creation date
MEMBCURREYYYY5 NUM PDS / PDSE member current record count
MEMBENTREYYYY8 PDS / PDSE member load module entry point
MEMBERS AYYYY6 NUM Number of PDS members
MEMBID EYYYY8 CHARPDS / PDSE member ID
Note: This field supports selection via a mask.
MEMBINTREYYYY5 NUM PDS / PDSE member initial record count
MEMBLMDTEYYYYD DATEPDS / PDSE member last mod date
MEMBLMTIEYYYY8 TIMEPDS / PDSE member last mod time - hhmmss
MEMBMOD EYYYY5 NUM PDS / PDSE member modified record count
MEMBMODREYYYY5 NUM PDS / PDSE member modified record count
MEMBRMODEYYYN3 PDS / PDSE member load module RMODE
MEMBSSI EYYYY8 CHARPDS / PDSE member SSI
Note: This field supports selection via a mask.
MEMBSTOREYYYY8 PDS / PDSE member load module storage required
MEMBTTR EYYNY6 PDS member TTR - tttttrrr or X'xxxxxx'
MEMBVER EYYYY2 NUM PDS / PDSE member version number
MEMBVFM YNYN5 CHARPDS / PDSE member formatted version / mod
MEMNAME EYYYY8 CHARPDS / PDSE member name
Note: This field supports selection via a mask.
MFRCODE EYYYY3 CHARManufactures code
Note: This field supports selection via a mask.
MGMTCLASEYYVY8 CHARSMS management class
Note: This field supports selection via a mask.
NAME YYNY44CHARData set name or VSAM cluster name
NOBDB AYYNY3 NUM Number of bytes used in last directory block
NOEPV AYYSY3 NUM Number of extents for data set on this volume
NOEXTENTAYYYY3 NUM Number of extents on this volume (total)
NVSAMATREYYYN6 CHARSMS-managed non-VSAM attributes (in NVR)
NVSAMFLGEYYYN7 CHARSMS-managed non-VSAM flags in NVR:
ATTREXT - Extended attribute (EA)
EXTEND - Extended Format (EF)
OLDBKUP YYVN2 NUM ABR old backup # of ABR backup
OPTCD EYYVY2 CHAROption code byte:

A - (DAM) Actual addressing
BC - ICF VSAM catalog
C - (SAM) Chained scheduling using PCI
DB - (DAM) Dynamic buffering
E - (DAM) Extended search
F - (DAM) Feedback
I - (IS) Independent overflow area
IC - ICF VSAM data set
L - (IS) Delete
M - (IS) Master index
R - (IS) Reorganization criteria
RB - (DAM) Relative block addressing
RE - (DAM) Read exclusive
TO - (DAM) Track overflow
UF - (IS) Full track index write
W - (All) Write validity check
Y- (IS) Cylinder overflow area
OVERFLOWAYYYY10NUM Number of overflow records available (IAM)
OVERFPERAYYYY3 NUM Overflow percent of used blocks (IAM)
OVERUSEDAYYYY10NUM Number of overflow records used (IAM)
OWNER AYYYY8 CHAROwner ID
PATHNAMEEYYYY44CHARPath name (ICF VSAM)
PRIALLOCAYYYY8 NUM Primary allocation quantity (ICF VSAM / Enhanced IAM)\
PRIBYTESAYYYYB BYTEPrimary allocation in bytes (ICF VSAM / Enhanced IAM)
PRIMEUSE YYYY8 NUM Number of used prime extension blocks (IAM)
PRIMEXTN YYYY8 NUM Number of prime extension blocks (IAM)
PROTECT YNYN4 CHARProtection indicators:

PASR - Password required for read and write
PASW - Password required for write
RACF - Protected by IBM RACF or equivalent product
NONE - No security indicated in Format1 DSCB
RANK AYYNN6 NUM Rank within sorted data (assigned)
RECFM EYYVY5 CHARRecord format:

A - ASA control character
B - Blocked
F - Fixed
M - Machine control character
S - Standard/spanned
T - Track overflow
U - Undefined
V - Variable
* - None of the above
RECORDS AYYYY10NUM Number of records (IAM / ICF VSAM)
RECOVDTAEYYYN8 SMS recovery data in VVR
RECTYPE YYVN3 NUM FDREPORT data record type:

1 - Volume record
2 - Data set / component record
4 - Volume summary record
8 - Prior compressed data record
9 - Prior active fields record
64 - Compressed data record
128 - Active fields record
RECVER YYVY4 CHARFDREPORT product version record format
RELALCNTAYYYY5 NUM Relative number of associated aliases
RESOROWNEYYYN16CHARSMS resource ownership in VVR
RETRIEVEAYYYY10NUM Number of records retrieved (IAM / ICF VSAM)
RKP AYYYY4 NUM Data set relative key position
RSVD1 YYYY2 Reserved field (offset 61 / x'3D')
RSVD2 YYYY8 Reserved field (offset 78 / x'4E')
RUNDATE AYYYYD DATERun date
RUNTIME AYYYY8 TIMERun time - hh.mm.ss
SCLUSTER YNNN20CHARShort cluster name (first 20 bytes only)
SDSN YNNN20CHARShort data set name (first 20 bytes only)
SECAFLAGEYYVY5 CHARSecondary allocation flags:

BLK - Allocated in blocks
CON - Contiguous (CONTIG)
CYL - Allocated in cylinders
FIV - Five largest extents (ALX)
MAX - Largest extent (MXIG)
RND - Rounded to cylinders (ROUND)
TRK - Allocated in tracks
SECALLOC AYYYY8 NUM Secondary allocation quantity
SECBYTES AYYYY BYTESecondary allocation (Bytes, kBytes, MBytes)
SECURFLG YYYN4 CHARSecurity Flags:

RACF - Discrete IBM RACF profile
OWNC - Ownership cluster
SECURITY EYNYN4 CHARResults of RACROUTE invocation

DSCB - Data set protected by a specific profile
NODS - No decision returned by SAF
NONE - No protection
PROFILE - Data set protected by a generic profile
SECVERMO EYNYN8 CHARSecurity verification module (ICF VSAM)
Note: This field supports selection via a mask.
SECXFLAG YYYN3 CHARSecondary allocation extension flag:

ABL - Average block length
BYT - Bytes
KBY - Kilobytes
MBY - Megabytes
SELALIAS YYYY35CHARSelecting alias
SGDGBASE YNNN20CHARShort GDG base name (first 20-bytes)
SHROPT YNYY3 CHARShare options (ICF VSAM / IAM)
SIZE AYYSY5*NUM Allocated tracks
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEFREE AYYSY5* NUM Tracks not in use within data set extents
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SIZEUSED AYYSY5*NUM Tracks in use within data set extents
Note: The width of the size fields (in tracks) is 6 if the FATDISK option is enabled.
SMSFLAGS EYYVN4 CHARSMS-managed data set flag byte in DSCB:

MANAGED (S) - SMS-managed
NOBCS (N) - Not cataloged
REBLOCK (R) - Reblockable
DADSMCRT (D) - DADSM assigned blksize
PDSE (I) - Partitioned data set extended
PDSEX (X) - Hierarchical File System (HFS)
ATTREXTN (E) - Extended Attribute (EA)
STRIPE (Z) - Extended Format (EF)
SNAME YNNN20CHARShort data set name or VSAM cluster name (first 20 bytes only)
SOURCE EYYNN7 CHARSource of the data record:

ARCHIVE - Archive control file
BCDS - HSM backup control data set
CATALOG - System catalog
CATARCH - Auto-recall records from catalog appended with Archive Control File (ACF) data
CATVTOC - Catalog records appended with VTOC and VVR data of selected volume(s)
MCDS - DFSMShsm migration control data set
TVTOC - FDR, FDRABR, or FDRDSF backup file(s)
VTOC - VTOC of volume
VTOCVVR - VTOC of volume appended with VVDS data
SPACEFLG EYYYY3 CHARSpace allocation flags (ICF VSAM)

CYLINDERS - Allocated in cylinders
KILOBYTES - Allocated in kilobytes
MEGABYTES - Allocated in megabytes
RECORDS - Allocated in records
TRACKS - Allocated in tracks
SPLCLS YNNN27CHARSplit ICF cluster name on two lines
SPLDSN YNNN27CHARSplit data set name on two lines
SPLGDGB YNNN27CHARSplit GDG base name
SPLNAME YNNN27CHARSplit data set name or ICF cluster name on two lines
SSID EYYYY4 CHARControl unit subsystem identifier
Note: This field supports selection via a mask.
STORCLAS EYYVY8 CHARSMS storage class
Note: This field supports selection via a mask.
STORGRP EYYYY8 CHARSMS storage group name
Note: This field supports selection via a mask.
STRIPECT AYYYN3 NUM Extended format stripe count
SUBCFLAG EYYYN17CHARSMS sub-cell flag byte in VVR

FUZZYBK1 - Data set eligible for backup while open for update
FUZZYBK2 - Data set backup while open for update is blocked
LOGRECVR - Data set was restored with a backup copy taken when the data set was open for update
SUBCVERS AYYYN3 NUM SMS sub-cell version number in VVR
SYSCODE EYYYN13HEX System code field in DSCB
Note: This field supports selection via a mask.
SYSID AYYYY4 CHARSystem identification from SMF
TBLKCNT YYYY8 NUM Total block count
TIMESTMP YYNN16CHARTime stamp (IAM / ICF VSAM)
TRACKCAP YYVY5 NUM Maximum track capacity of device in bytes
TRKBAL YYNY5 NUM Data set track balance; number of free bytes on last active track
TRKCYL YYVN3 NUM Number of tracks per cylinder
TRKSCA YYYY3 NUM Number of tracks per Control Area (CA) (ICF VSAM)
TVTOCDSN AYYVY44CHARInput backup data set name
UCBID EYNVY8 HEX UCB 4-byte device type (hex)
UCBSTATS EYYYN7 CHARUCB status indicators:

OFFLINE
ONLINE
UNIT YYYYY3 CHARUnit address of DASD volume
UPDATES AYYYY10NUM Number of records updated (IAM / ICF VSAM)
USEDEXT AYYYY4 NUM Number of used extents this volume
USERDATA AYYYY10CHARUser data size - extended
VOLCFLAG YYYYN8 CHARVolume cell flags (ICF VSAM):

CANDWSPACE (C) - Candidate with space
EXTENTSYNC (E) - Extents do not match VTOC
GUARSPACE (G) - SMS guaranteed space
OVERFLOWVOL (O) - Overflow volume
PRIMEVOLUME (P) - Prime volume
RELCIADDR (R) - Relative CI addressing
VOLGROUP AY CHARVolume group
Note: This field supports selection via a mask.
VOLID EYYYY4 CHARDASD volume identification
Note: This field supports selection via a mask.
VOLSQ AYYVY3 NUM Data set volume sequence number
VOLUME AYYYY6 CHARVolume serial number
Note: This field supports selection via a mask.
VSFREBYT AYYYN10NUM Bytes of free space (ICF VSAM)
VVRSTATS EYYYN9 CHARIndicates VVDS errors for this data set (up to 2 may be displayed):
DPLR - Multiple identical VVR / NVR records
EXTM - Extent mismatch between VVR and DSCB
MLTQ - Multiple VVR “Q” records
MLTR - Multiple non-identical VVR / NVR records
NONE - No errors
NVVR - No VVR / NVR record (or all matching records have errors)
XDSNAME EY CHARExtended data set name (selection only)
XLSTAR AYYNY8 HEX Extended last block pointer - ttttttttrrr or X'xxxxxxxx'

back to top


DATATYPE VOLDATA FIELD NAME TABLE

This is complete list of all operands that are available for use with DATATYPE=VOLDATA. They provide the ability to select all DASD volumes, either online or offline.

DATATYPE=VOLDATA Field Name Table
Field NameXSELREPSORTSUMMPUN LenAttrDescription
BKCYCLE AYYYY3 NUM ABR cycle number of backup tape
BKDATE AYYVYD DATEBackup date
BKDAYS AYYVY5 NUM Days since backup
BKDEVCLSEYYVY4 CHARBackup tape device class
BKDEVTYPEYYVY7 CHARBackup tape device type
BKDSNS AYYVY3 NUM Number of active backup data sets
BKEXDATEAYVYYD DATEBackup expiration date
BKEXDAYSAYVYY5 NUM Days until backup expiration
Note: If the expiration date is 99.000 or 99.365 or above, this is set to 65535.
BKFILENOAYVYY4 NUM Backup tape file number
BKGEN AYYYY4 NUM ABR generation number of backup tape
BKSUFFIXEYVYY8 CHARBackup tape dsname suffix
Note: This field supports selection via a mask.
BKTAPCNTAYNYY2 NUM Backup tape volume count
BKTIME AYYYY8 TIMEBackup time - hhmmss (APPL backup / ABREXIT)
BKVOL EYYVY34CHARBackup tape volumes required to restore
Note: This field supports selection via a mask.
BLKSIZE AYYVY5 NUM Data set block size
BLKSTRK AYYVY4 NUM Number of blocks per track
UCBSTATSEYYYN7 CHARUCB status indicators:

OFFLINE
ONLINE
VL%FDSCBAYYYY3 NUM Volume DSCBs free percent
VL%FINDXAYYYY3 NUM Volume VTOCIX free percent
VL%FTRKSAYYYY3 NUM Volume tracks free percent
VL%FVVDSAYYYY3 NUM Volume VVDS free percent

back to top


DATATYPE DEFDASD FIELD NAME TABLE

This is complete list of all operands that are available for use with DATATYPE=DEFDASD. DEFDASD attempts to extract a limited set of data from all defined DASD devices, regardless of their current state. DEFDASD also provides access to the storage resident fields that describe the available storage for System Managed Storage (SMS) volumes.

DATATYPE=DEFDASD Field Name Table
Field NameXSELREPSORTSUMMPUN LenAttrDescription
UCBSTATS EYYYN7 CHARUCB status indicators:

OFFLINE
ONLINE
VL%FTRKS AYYYY3 NUM Volume tracks free percent
VL%UTRKS AYYYY3 NUM Volume tracks used percent
VLALOSTA EYYYN6 CHARVolume allocation status

ALLOC - allocated device
ONLINE - online only
SYSRES - system residence (IPL volume)
UNLOAD - scheduled for unload
VLBYTCYL YYYY10NUM Bytes/cylinder
VLBYTTRK YYYY5 NUM Bytes/track
VLBYTVOL AYYYY10NUM Bytes/volume
VLCCA AYYNY2 HEX Channel connect address
VLCTLSER EYYYY5 CHARController serial number
Note: This field supports selection via a mask.
VLCTLTYP YYYY6 CHARController type
VLCYLVOL AYYYY5 NUM Number of cylinders/volume
VLDCEACT EYYYN19CHARDCE active features

CCC - Extended remote copy
CFW - Cache fast write
DCA - Dual copy active
DFW - DASD fast write
TKC - Track caching
VLDCEFLG EYYYN19CHARDCE flag byte 2

CSW - Compare swap bit
DPX - Duplex device
PKC - Pack change in process
PRI - Primary duplex device
PVM - Non-full pack VM minidisk
SEC - Secondary duplex device
SHR - Device sysgen’d SHARED
SSV - Subsystem is valid
VLDCEFL8 EYYYN9 CHARDCE flag byte 8

CYMG - Cylinder managed storage exists
F8F9 - Format 8 and Format 9 DSCB can exist on this volume
VLDEVCLS YYYY4 CHARDevice class
VLDEVTYP EYYYY7 CHARDevice type
VLDIRBTR YYYY3 NUM Number of directory blocks/track
VLDSCBTR YYYY3 NUM Number of DSCBs/track
VLMFRCOD EYYYY3 CHARManufactures' code
Note: This field supports selection via a mask.
VLMOUSTA EYYYN8 CHARVolume mount status

RESERVED - Reserved volume
RESIDENT - Permanently resident volume
VLRANK AYYNY6 NUM Rank within sorted data
VLSMSMBC YYYY11NUM SMS volume capacity in megabytes
VLSMSMBF YYYY11NUM SMS volume free space in megabytes
VLSMSSTG EYYYY8 CHARSMS storage group name
Note: This field supports selection via a mask.
VLSSID EYYYY4 CHARSSID
Note: This field supports selection via a mask.
VLSYSID AYYYY4 CHARSystem identification from SMF
VLTRKCYL YYYY3 NUM Number of tracks/cylinder
VLTRKVO AYYYY5 NUM Number of tracks/volume
VLUCBFLA YYNN24CHARUCB flags (UCBFLA)
VLUCBFL4 IFYY 24CHARIndicators from the UCB field UCBFL4

CMBU - CMB update required
MDSE - DSE1 is required during MSI
PAVA - PAV-alias device
PAVB - PAV-base capable device
PAVH - HiperPAV base or alias device
SDSE - DSE1 is required during SIO
WDAV - DAVV waiting for mount
VLUCBID AYYYY8 HEX UCB 4-byte device type (hex)
VLUNIT AYYYY3 CHARUnit address
VLUNITNA YYYY8 CHARGeneric unit name
VLUSEATR EYYYY7 CHARVolume use attribute:

PRIVATE - Allocated only to a specific volume request
PUBLIC - Allocated to temporary non-specific volume request
STORAGE - Allocated primarily to non-temporary, non-specific volume request.
VLVOLSER AYYYY6 CHARDASD volume serial number
Note: This field supports selection via a mask.

Published with permission of Innovation Data Processing

back to top


  FDRABR pages

Lascon latest major updates

Welcome to Lascon Storage. This site provides hints and tips on how to manage your data, strategic advice and news items.